Most common
problems & fixes

Is your AEG FAVORIT 40850 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

Problems with water inlet

Water tap is blocked with limescale or faulty

Check the water tap and have it repaired if necessary

Problems with water drainage

The sink spigot connection is blocked

Clean the sink spigot outlet

The cycle is not starting

The mains plug is not plugged in

Plug in mains plug

The cycle is not starting

A fuse in the house’s wiring system is defective

Check the fuse and replace if necessary

Quick setup

Follow these easy steps to get your AEG FAVORIT 40850 Dishwasher up and running in no time.

1

Safety Precautions

Ensure that the dishwasher is transported in an upright position to prevent salt water leakage. Before using the dishwasher for the first time, check for any damage caused during transport. Do not connect a damaged appliance, and contact your supplier if any damage is found.

2

Installation Preparation

The water inlet hose, drain hose, and mains cable must be connected to the side of the dishwasher as there is no space for them behind the appliance. Ensure that all hoses and cables are not kinked or crushed when the dishwasher is positioned.

3

Water Softener Setting

The water softener must be set both manually and electronically to avoid lime deposits on dishes and in the dishwasher. Manually adjust the water hardness dial on the left wall of the dishwasher interior. For electronic setting, press the ON/OFF button and follow the instructions for setting the water hardness level.

Dishes Galore!

The AEG FAVORIT 40850 can handle 12 place settings in one go, including serving dishes! That's a lot of room for all your culinary masterpieces.

High and Dry

With the AEG FAVORIT 40850, the drying fan keeps running even after the cycle ends, ensuring your dishes come out dry and ready to use.

Troubleshooting

The AEG FAVORIT 40850 Dishwasher has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your AEG might be giving you.

Fault code Å10

Problems with water inlet. This error indicates that there is an issue with the water supply to the appliance. Check the water tap to ensure it is not blocked with limescale or faulty. Additionally, check the position of the hose to ensure it is correctly placed. Once resolved, press the button for the cycle that has started to continue the operation.

Fault code Å20

Problems with water drainage. This error suggests that the dishwasher is unable to drain water properly. Inspect the sink spigot connection to ensure it is not blocked. Also, check the position of the water drain hose to confirm it is correctly positioned. Clean the sink spigot outlet if necessary. Once resolved, press the button for the cycle that has started to resume the operation.

Fault code Å30

The anti-flood system has been triggered. This indicates that there may be a water leakage within the appliance. Immediately shut off the water tap, switch off the appliance, and contact the Customer Care Department for assistance. It is important to address this issue promptly to prevent any potential water damage.

Safety Precautions

Ensure the dishwasher is transported in an upright position to prevent salt water leakage. Cut off and safely dispose of any removed plugs to prevent electric shock hazards.

Control Features

The dishwasher includes a multi-display for setting the water softener level, checking the rinse aid dispenser, and viewing the remaining cycle time. Program and function buttons allow for cycle selection and additional settings such as delayed start and 3-in-1 function activation.

Installation

The appliance should be connected to cold or hot water supplies up to 60°C. Ensure that hoses and cables are connected at the side of the dishwasher, as there is no space behind the appliance.

Using the 3-in-1 Function

When using 3-in-1 detergents, the rinse aid inflow is turned off. If drying issues occur, users should manually add rinse aid.

Technical Specifications

The AEG FAVORIT 40850 has a capacity of 12 place settings, operates with a water pressure range of 1-10 bar, and requires a 230 V electrical connection. Dimensions are 850 x 598 x 598 mm with a total output of 2250 W.

Dishwashing Cycles

Users can select from various dishwashing cycles using the program buttons. The delay timer allows cycle start times to be postponed, and cycles can be changed before they begin.

Fault Codes

Fault codes such as Å10 (water inlet issues) and Å20 (water drainage issues) provide diagnostic guidance. If displayed, users should check relevant connections and, if unresolved, contact service support.

Anti-flood System

The dishwasher is equipped with an anti-flood system. In case of a fault, the safety valve in the water inlet hose will immediately stop the water supply and activate the drain pump to prevent flooding.

Maintenance

Check out our tips to prevent many common issues and extend the life of your AEG Dishwasher.

Regular Cleaning

Clean the dishwasher controls with a soft cloth. Do not use furniture care products or aggressive cleaners. Regularly check and clean the internal dispensers, door seal, and water inlet filter if fitted.

Filter Maintenance

Filters must be regularly checked and cleaned to prevent spoiling wash results. Open the door, remove the lower basket, turn the handle about ¼ turn anticlockwise to remove the filter system, clean the filters under running water, and re-insert them correctly.

Spray Arm Maintenance

Regularly check the jets in the spray arms for blockages to ensure proper cleaning performance.

Water Softener Setup

Set the water softener manually and electronically to avoid scale deposits on dishes and in the dishwasher. Use soft water with low lime content for washing.

Dishwasher Cycle Check

Ensure the spray arms can turn freely before starting a cycle. Turn the water tap on fully, close the door, and select the desired cycle.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

Technical Specifications

Compliance

Safety Features

Installation

AEG FAVORIT 40850 Dishwasher: Efficiency Meets Versatility

The AEG FAVORIT 40850 is a state-of-the-art dishwasher designed to meet the rigorous demands of modern households, combining efficiency with versatility in a sleek, free-standing design. With the capacity to accommodate up to 12 place settings, this dishwasher is perfect for large families or those who love to entertain. Engineered to conform with EU directives for safety and performance, it boasts a powerful 2250 W total output and operates smoothly on a 230 V electrical connection. The FAVORIT 40850 features a range of innovative functionalities, including a multi-display for cycle monitoring and function buttons that allow for easy customization of dishwashing cycles. The appliance's water softener unit ensures optimal cleaning results, while the integrated anti-flood system provides peace of mind by preventing water damage. Whether dealing with heavily soiled cookware or delicate glassware, the AEG FAVORIT 40850 delivers exceptional cleaning performance with its intelligently designed spray arms and adjustable water temperature settings, tailored to tackle even the toughest stains with ease. Enjoy the perfect blend of style, efficiency, and reliability with the AEG FAVORIT 40850, a dishwasher that truly understands your needs.